Tankless units are rated on temperature rise, and at this elevation the rise is larger than the brochure assumed — which is why a unit can be perfectly healthy and still disappointing.
Capacity versus fault
Incoming water here is cold, sometimes very cold, and heating it to a usable temperature takes more of the unit's output. A household drawing two showers at once can exceed what the appliance can deliver even though nothing is broken. The fix is managing simultaneous demand or changing equipment, not replacing a part.
The code on the display
Manufacturers publish codes that separate ignition faults from flow faults from overheat trips. Reading the code, rather than describing the noise, is what shortens the visit.
Scale and sediment in the waterway
A well-and-spring supply can carry mineral load and grit. The exchanger is a narrow passage, so it fouls before anything else does: capacity drops, then the unit trips on overheat. Descaling restores it where the fouling has not gone too far.
Frost protection and power
The unit's freeze protection needs electricity. Where an installation sits in an unheated space and the power fails in a cold snap, the exchanger is exposed — and a split exchanger is a replacement, not a repair. Isolating and draining during an outage is the practical defence.
Propane and derating
Where the fuel is propane from an on-site tank, the supply has to be sized for a unit that fires hard, and the appliance has to be set for the elevation. Both are checked before any part is suspected.