Without a flame to watch, an electric heater is read through its behaviour — and the behaviour is fairly specific.
Cold everywhere
The supply comes first: breaker, fuse, disconnect. If power is present and the upper reset has tripped, the trip is a symptom. It happens when the tank overheats, which means a thermostat stuck on or an element that has failed. Resetting without investigating schedules the next trip.
Hot, then cold
The upper element heats the top of the tank, the lower element carries the bulk. When the top works and the bottom does not, the first shower is fine and the second is not. That pattern points directly at the lower circuit and saves opening the wrong half of the unit.
Scale on the element
Claremont's supply is predominantly local groundwater, and minerals plate onto the element sheath. A scaled element heats slowly, rumbles, and eventually splits. Replacement is straightforward; draining the tank at the same time prevents the new element starting under the same layer.
The dry-fire mistake
An element energised with no water around it fails almost instantly. After any drain and refill, the tank is filled and air bled from a hot tap before the breaker goes back on. This is the single most expensive avoidable error with this appliance.
What belongs to an electrician
Anything upstream of the heater's own disconnect — panel work, new circuits, damaged cable. That is quoted as electrical work, and it is not something a plumbing visit should improvise.