At night, a failed water heater is not a repair question. It is a question about how much of the building gets wet, and the answer is decided in the first few minutes.
Shut the supply before anything else
A failed tank keeps emptying for as long as it is fed. The valve on the cold inlet — usually on the pipe above the heater — closes it. If that valve is stiff, seized or missing, the house shut-off is the fallback. Stopping the water turns an emergency into a decision that can be made calmly.
Then the energy: the gas valve closed or the breaker off, whichever the unit uses, and only where the controls are reachable from dry footing.
What actually counts as urgent
- Water still escaping from the tank.
- A relief valve discharging continuously.
- A unit that has tripped its breaker more than once.
- A building with no hot water at all — a business opening in the morning, a household with an infant or an older resident, a rental with tenants in place.
Not urgent, despite feeling like it: a noisy heater, an old one, or water that now takes longer to heat. Those belong in normal hours, and calling them emergencies only delays the calls that are.
What the call can settle
It establishes the symptom, whether the supply is isolated, and what the failure most likely is — which decides whether the next step is a part or a replacement. It cannot promise a price or an arrival time, because neither is a fixed fact; the one promise this page makes is that the phone is answered at any hour by a person.
After the water is off
Leave the heater isolated until it has been looked at. Refilling a tank that has failed at the seam puts the water straight back on the floor, and relighting a flooded gas unit is a hazard, not a diagnosis.